Verification Traps (25ct)

Verification traps are required to verify that the instrument is properly calibrated. Verification traps are produced under strict laboratory controls and are engineered using the highest quality Teflon^®-coated (PTFE) fiberglass material available. Traps are packaged in contaminant-free recyclable trays and sealed for maximum freshness and longevity.

Verification traps should be stored at room temperature away from direct heat. Clean cotton gloves (Large, Small) are required when handling sample, calibration or verification traps to prevent contaminants such as natural oils, dirt and lotions from interfering with the performance of the instrument. Verification traps are single use and should not be reused.